display uni-mng interface fabric-port configuration
Function
The display uni-mng interface fabric-port configuration command displays the fabric port configuration.
This command can only be executed on a parent switch.
Parameters
| Parameter | Description | Value |
|---|---|---|
| parent | Display the parent-side fabric port configuration. |
- |
| as name as-name | Display the AS-side fabric port configuration. If parent and as-name are not specified, the configurations of all the fabric ports in an SVF system are displayed. |
The value must have an existing AS name. |
Usage Guidelines
You can run the display uni-mng interface fabric-port configuration command to check the fabric port configuration.
Example
# Display the fabric port configuration.
<HUAWEI> display uni-mng interface fabric-port configuration
Interface Direction Connect-type Member-name Location
-------------------------------------------------------------------------------
Fabric-port0 Down Direct Eth-Trunk0 Parent
Fabric-port1 Down Direct Eth-Trunk1 Parent
Fabric-port3 Down Direct Eth-Trunk3 Parent
Fabric-port5 Down Direct Eth-Trunk5 Parent
Fabric-port6 Down Direct Eth-Trunk6 Parent
Fabric-port7 Down Direct Eth-Trunk7 Parent
Fabric-port8 Down Direct Eth-Trunk8 Parent
Fabric-port9 Down Indirect Eth-Trunk9 Parent
Fabric-port10 Down Indirect Eth-Trunk10 Parent
Fabric-port11 Down Direct Eth-Trunk11 Parent
Fabric-port15 Down Direct Eth-Trunk15 Parent
-------------------------------------------------------------------------------
Total : 11
Item |
Description |
|---|---|
Interface |
Fabric port name. |
Direction |
Direction of a fabric port. Down indicates downlink and Up indicates uplink. |
Connect-type |
Connection mode of a fabric port. Direct indicates the direct connection mode, whereas Indirect indicates the indirect connection mode (connection through an intermediate network). |
Member-name |
Eth-Trunk to which a fabric port is bound. |
Location |
Device where a fabric port resides. |