display uni-mng execute-failed-record

Function

The display uni-mng execute-failed-record command displays execution failure records after the configuration is delivered to an AS.

This command can only be executed on a parent switch.

Format

display uni-mng execute-failed-record { profile | as-direct-config } as name as-name

Parameters

Parameter	Description	Value
profile	Displays records of configurations delivered through profiles.	-
as-direct-config	Displays records of configurations directly delivered through commands.	-
as name as-name	Specifies the name of an AS.	The value must have an existing AS name.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display uni-mng execute-failed-record command to check execution failure records after the configuration is delivered to an AS.

Example

# Display execution failure records after the configuration is delivered to an AS.

<HUAWEI> display uni-mng execute-failed-record as-direct-config as name as1
Info: This operation may take a few seconds. Please wait....done.                                                          
--------------------------------------------------------------------------------                                                    
View name     : system                                                                                                              
Command       : arp speed-limit source-mac maximum 1                                                                                
Execute time  : 2015-01-19 15:09:23 DST                                                                                           
Failed reason : This device does not support this command.                                                                          
--------------------------------------------------------------------------------

**Table 1** Description of the **display uni-mng execute-failed-record as-direct-config** command output
Item	Description
View name	View in which the configuration is executed.
Command	Command that failed to be executed.
Execute Time	Time the configuration is executed.
Failed reason	Cause of the execution failure.