display wlan ble-link-info

Function

The display wlan ble-link-info command displays connection information about the Bluetooth-based air interface on an AP.

Format

display wlan ble-link-info { ap-id ap-id | ap-name ap-name }

Parameters

Parameter	Description	Value
ap-id ap-id	Specifies the AP ID.	The AP ID must already exist.
ap-name ap-name	Specifies the AP name.	The AP name must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check connection information about the Bluetooth-based air interface on an AP.

Example

# Display connection information about the Bluetooth-based air interface on an AP named huawei.

<HUAWEI> display wlan ble-link-info ap-name huawei
Info: This operation may take a few seconds. Please wait for a moment.done.     
-------------------------------------------------------------------------------------   
BLE access MAC                         : xxxx-xxxx-xxxx                         
Status                                 : paired                                 
Link status changed time               : 2019-04-11  09:12:46                   
-------------------------------------------------------------------------------------

**Table 1** Description of the **display wlan ble-link-info** command output
Item	Description
BLE access MAC	MAC address of a STA accessed through Bluetooth. This address is randomly generated when the STA establishes a Bluetooth connection with the AP.
Status	Bluetooth connection status between a STA and the AP. link established: The link is established between the STA and AP. paired: The STA and AP are successfully paired.
Link status changed time	Time when the connection status is updated.