The dot1x eap-notify-packet command enables the device to send an EAP packet code number to users.
The undo dot1x eap-notify-packet command disables the device from sending an EAP packet code number to users.
By default, the device is disabled from sending an EAP packet code number to users.
dot1x eap-notify-packet eap-code code-number data-type type-number
undo dot1x eap-notify-packet [ eap-code code-number data-type type-number ]
Parameter |
Description |
Value |
|---|---|---|
eap-code code-number |
Specifies an EAP packet code number sent to users. |
The value is an integer that ranges from 5 to 255. The default value is 255. |
data-type type-number |
Specifies the data type in EAP packets sent to users. |
The value is an integer that ranges from 1 to 255. The default value is 255. |
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.
After the upgrade, this command is no longer supported, and it is replaced by the dot1x eap-notify-packet eap-code code-number data-type type-number command in the 802.1X access profile view.