dot1x reauthenticate (upgrade-compatible command)

Function

The dot1x reauthenticate command enables periodic 802.1X re-authentication on an interface.

The undo dot1x reauthenticate command disables periodic 802.1X re-authentication on an interface.

By default, periodic 802.1X re-authentication is disabled on an interface.

dot1x reauthenticate

undo dot1x reauthenticate

None

Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view

2: Configuration level

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After the upgrade, this command is no longer supported, and it is replaced by the dot1x reauthenticate command in the 802.1X access profile view.