The dot1x timer reauthenticate-period command sets the re-authentication interval for 802.1X authentication users.
The undo dot1x timer reauthenticate-period command restores the default re-authentication interval.
By default, the re-authentication interval is 3600 seconds.
dot1x timer reauthenticate-period reauthenticate-period-value
undo dot1x timer reauthenticate-period
Parameter |
Description |
Value |
|---|---|---|
reauthenticate-period-value |
Specifies the re-authentication interval for 802.1X address authentication users. |
The value is an integer that ranges from 60 to 7200, in seconds. |
System view, Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.
After the upgrade, this command is no longer supported, and it is replaced by the dot1x timer reauthenticate-period reauthenticate-period-value command in the802.1X access profile view.