dot1x timer (upgrade-compatible command)

Function

The dot1x timer command sets values of timers used in 802.1X authentication.

The undo dot1x timer command restores the default settings of timers used in 802.1X authentication.

By default, the values of timers used in 802.1X authentication are not set.

dot1x timer client-timeout client-timeout-value

undo dot1x timer client-timeout

Parameter	Description	Value
client-timeout client-timeout-value	Specifies the timeout interval of the authentication response from the client. For details, see dot1x retry.	The value is an integer that ranges from 1 to 120, in seconds. By default, the timeout interval of the authentication response from the client is 5 seconds.

Parameter

Description

Value

client-timeout client-timeout-value

Specifies the timeout interval of the authentication response from the client.

For details, see dot1x retry.

The value is an integer that ranges from 1 to 120, in seconds.

By default, the timeout interval of the authentication response from the client is 5 seconds.

System view

2: Configuration level

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After the upgrade, this command is no longer supported, and it is replaced by the dot1x timer command in the 802.1X access profile view.