dual-active detect mode relay (upgrade-compatible command)

Function

The dual-active detect mode relay command enables DAD in relay mode on a specified interface.

By default, DAD is disabled on an interface in a stack.

Format

dual-active detect mode relay

Parameters

None

Views

Eth-Trunk interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure DAD in relay mode only when a stack containing two member switches is configure with an inter-chassis Eth-Trunk and a proxy device supports the relay function.

Prerequisites

The stack containing two member switches is running properly, and DAD in direct mode is not configured for the stack.

Precautions

The dual-active detect mode relay command performs the same function as the mad detect mode relay command.

Example

# Configure DAD in relay mode on Eth-Trunk 10.

<HUAWEI> system-view
[HUAWEI] interface eth-trunk 10
[HUAWEI-Eth-Trunk10] dual-active detect mode relay