dual-active exclude (upgrade-compatible command)

Function

The dual-active exclude command excludes specified interfaces of a stack from shutdown.

By default, only physical member ports are excluded from shutdown.

dual-active exclude interface { interface-type interface-number1 [ to interface-type interface-number2 ] } &<1-10>

Parameter	Description	Value
interface { interface-type interface-number1 [ to interface-type interface-number2 ] }	Specifies the type and number of an interface: interface-type specifies the type of the interface. interface-number1 specifies the number of the first interface. interface-number2 specifies the number of the second interface.	The value of interface-number2 must be larger than that of interface-number1.

System view

2: Configuration level

This command is available to aid upgrade compatibility. It can be run when it is entered in full.

After the upgrade, it is replaced by the mad exclude command.