eth-trunk (AP wired port profile view)

Function

The eth-trunk command adds an AP interface to an Eth-Trunk.

The undo eth-trunk command removes an AP interface from an Eth-Trunk.

By default, an AP interface is not added to any Eth-Trunk.

Format

eth-trunk trunk-id

undo eth-trunk

Parameters

Parameter	Description	Value
trunk-id	Specifies the ID of an Eth-Trunk.	The value is an integer, and the value is 0.

Views

AP wired port profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To improve the connection reliability and increase the bandwidth, you can run this command to bind multiple interfaces into an Eth-Trunk.

Prerequisite

The physical interface to be added to an Eth-Trunk cannot have other configurations. Before adding a physical interface to an Eth-Trunk, clear all configurations on it except the interface status, descriptions, LLDP function, and alarm function for CRC errors.

Precautions

After the configuration, you need to restart the AP to make the configured Eth-Trunk on the AP's wired interfaces take effect.
APs that have only one physical uplink network interface do not support this command.
Downlink interfaces on an AP do not support the Eth-Trunk function.
Member interfaces in an Eth-Trunk do not support the PVID or user isolation configuration.

This command is available only for the AP7030DE, AP9330DN, AP5050DN-S, AP4030DN-E, AP5030DN, AP5130DN, AP8030DN, AP8050DN, AP8150DN, AP8050DN-S, AP8130DN, AD9431DN-24X, AP4051TN, AP6052DN, AP8050TN-HD, AP8082DN, AP8182DN, AP7052DN, AP7060DN, WA375DD-CE, AirEngine 5760-10, AP7152DN, AD9430DN-24, AD9430DN-12, AP4030TN, AP4050DN-E, AP4050DN-HD, AP6050DN, AP6150DN, and AP7050DN-EAirEngine 8760-X1-PRO, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AirEngine 5760-22W, AirEngine 5760-22WD, AirEngine 8760R-X1, AirEngine 8760R-X1E, AirEngine 6760R-51, AirEngine 6760R-51E, and AirEngine 9700D-M.

Example

# Add the AP interface to Eth-Trunk 0.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] eth-trunk 0