flow-probe metadata-collect server

Function

The flow-probe metadata-collect server command configures the IP address and port number of the CIS server.

The undo flow-probe metadata-collect server command deletes the configured IP address and restores the configured port number to the default value.

By default, the IP address of the CIS server is not specified and the default port number is 8514.

Format

flow-probe metadata-collect server ip ip-address [ port port-number ]

undo flow-probe metadata-collect server

Parameters

Parameter	Description	Value
ip ip-address	Specifies the IP address of the CIS server.	The value is an IPv4 address in dotted decimal notation.
port port-number	Specifies the port number of the CIS server.	The value is an integer ranging from 1 to 65535.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The default port number of the peer CIS server connected to the flow probe metadata collector is subject to the metadata collection and transmission mode. Current switch only support UDP protocol for the metadata transmission, the default port number is 8514.

When configuring the IP address of the CIS server:

If the CIS server is of the standard version, the IP address is the data dispatcher management plane IP address of the CIS server. Multiple data dispatcher management plane IP addresses may exist. You can select any one of them.
If the CIS server is of the small-scale edition, the IP address is the Big Data cluster server management plane IP address of the CIS server. Multiple Big Data cluster server management plane IP addresses may exist. You can select any one of them.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

Example

# Set the IP address and port number of the CIS server to 10.1.1.1 and 10 respectively.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] flow-probe metadata-collect server ip 10.1.1.1 port 10