fwa enable

Function

The fwa enable command enables FWA for a Mesh profile.

The undo fwa enable command disables FWA for a Mesh profile.

By default, FWA is disabled for a Mesh profile.

Format

fwa enable

undo fwa enable

Parameters

None

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An outdoor Access Terminal (AT) needs to set up a Mesh link with a remote AP to provide network access for the connected users. You need to configure Mesh service on the remote AP and enable Fixed Wireless Access (FWA) in the Mesh profile so that the AT can connect to the remote AP.

Configuration Impact

FWA and vehicle-ground fast link handover are mutually exclusive in a Mesh profile.
After you enable FWA for a Mesh profile using the fwa enable command, the default value of link-num in the max-link-number link-num command is 32, and the value ranges from 1 to 32.
After you enable FWA in a Mesh profile using the fwa enable command, the RSSI threshold of a Mesh link is fixed as -90 dBm, and not changed by the link-rssi-threshold command.
After you enable FWA in a Mesh profile using the fwa enable command, you can complete Mesh service configuration without the need to bind a Mesh whitelist profile to the Mesh profile.
After you enable FWA for a Mesh profile using the fwa enable command, the radio bound to the Mesh profile allows access from only ATs. Do not enable FWA when ATs are not used to prevent a Mesh service configuration failure.

Example

# Enable FWA for the Mesh profile named test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] fwa enable

# Disable FWA for the Mesh profile named test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] undo fwa enable