hotspot2-profile

Function

The hotspot2-profile command creates a Hotspot2.0 profile or displays the view of an existing Hotspot2.0 profile.

The undo hotspot2-profile command deletes a Hotspot2.0 profile.

By default, no Hotspot2.0 profile is available.

Format

hotspot2-profile name profile-name

undo hotspot2-profile { name profile-name | all }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a Hotspot2.0 profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all Hotspot2.0 profiles.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To configure Hotspot2.0 services, create a Hotspot2.0 profile, configure network parameters in the Hotspot2.0 profile view, and bind the Hotspot2.0 profile to a VAP profile.

Follow-up Procedure

Configure the network type, roaming consortium list, and NAI realm list in the Hotspot2.0 profile and bind the Hotspot2.0 profile to a VAP profile to make the configuration take effect.

Precautions

In a Hotspot2.0 profile, network parameters and Internet access status are mandatory and can be configured using the network-type command.
Ensure that at least one of the following ANQP parameters is configured in a Hotspot2.0 profile.
- Roaming consortium list: Run the roaming-consortium-profile (Hotspot2.0 profile view) command to bind a roaming consortium profile to the Hotspot2.0 profile.
- NAI realm list: Run the nai-realm-profile (Hotspot2.0 profile view) command to bind a NAI realm profile to the Hotspot2.0 profile.
- 3GPP cellular network: Run the cellular-network-profile (Hotspot2.0 profile view) command to bind a cellular network profile to the Hotspot2.0 profile.
The following ANQP parameters are recommended.
- Roaming consortium list: Run the roaming-consortium-profile (Hotspot2.0 profile view) command to bind a roaming consortium profile to the Hotspot2.0 profile.
- Domain name list: Run the operator-domain-profile (Hotspot2.0 profile view) command to bind an operator domain profile to the Hotspot2.0 profile.

Example

# Create Hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot]