hotspot2-profile (VAP profile view)

Function

The hotspot2-profile command binds a Hotspot2.0 profile to a VAP profile.

The undo hotspot2-profile command unbinds a Hotspot2.0 profile from a VAP profile.

By default, no Hotspot2.0 profile is bound to a VAP profile.

Format

hotspot2-profile profile-name

undo hotspot2-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a Hotspot2.0 profile.	The Hotspot2.0 profile must exist.

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure network parameters through Hotspot2.0 profiles. After Hotspot2.0 profiles are applied, user terminals can obtain network information from APs and access the networks. After the configuration is complete, bind the Hotspot2.0 profile to a VAP profile to make the configuration take effect.

Precautions

Hotspot2.0 services require WPA2–802.1X authentication (WPA2 enterprise edition). Ensure that the security policy is set to WPA2–802.1X in the security profile bound to the VAP profile.

When a VAP profile has been bound to a radio, services will be interrupted when a Hotspot2.0 profile is bound to or unbound from the VAP profile, or parameters in the bound Hotspot2.0 profile are modified. Exercise caution when performing this operation.

Example

# Bind Hotspot2.0 profile hotspot to VAP profile vap-profile1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap-profile1
[HUAWEI-wlan-vap-prof-vap-profile1] hotspot2-profile hotspot