icmp-jitter-mode

Function

The icmp-jitter-mode command specifies the mode of an ICMP jitter test.

The undo icmp-jitter-mode command restores the default mode of an ICMP jitter test.

By default, the ICMP jitter test is in icmp-timestamp mode.

Format

icmp-jitter-mode { icmp-echo | icmp-timestamp }

undo icmp-jitter-mode

Parameters

Parameter	Description	Value
icmp-echo	Configures the ICMP jitter test to use ICMP Echo messages.	-
icmp-timestamp	Configures the ICMP jitter test to use ICMP Timestamp messages.	-

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

The icmp-jitter-mode command can only be used to configure the mode for ICMP jitter or path jitter tests.

Example

# Configure the ICMP jitter test to use ICMP Echo messages.

<HUAWEI> system-view
[HUAWEI] nqa test-instance admin icmpjitter
[HUAWEI-nqa-admin-icmpjitter] test-type icmpjitter
[HUAWEI-nqa-admin-icmpjitter] icmp-jitter-mode icmp-echo