ignore-stp-loopcheck

Function

The ignore-stp-loopcheck command disables STP loop detection function of PW, that is, the PW that cannot be blocked by STP.

The undo ignore-stp-loopcheck command restores the default configuration.

By default, STP loop detection is enabled for the PW.

Format

ignore-stp-loopcheck

undo ignore-stp-loopcheck

Parameters

None

Views

VSI-LDP-PW view

Default Level

2: Configuration level

Usage Guidelines

After STP loop detection is enabled, a PW may be blocked when an STP loop is detected. If you do not want a PW to be blocked upon an STP loop, you can run this command to disable STP loop detection.

Example

# Disable STP loop detection function of the PW named pw1.

<HUAWEI> system-view
[HUAWEI] vsi aa static
[HUAWEI-vsi-aa] pwsignal ldp
[HUAWEI-vsi-aa-ldp] vsi-id 1
[HUAWEI-vsi-aa-ldp] peer 1.1.1.1
[HUAWEI-vsi-aa-ldp] peer 1.1.1.1 pw pw1
[HUAWEI-vsi-aa-ldp-pw-pw1] ignore-stp-loopcheck