ingress-lsp protect-mode

Function

The ingress-lsp protect-mode command configures the protection mode for BGP ingress LSPs.

The undo ingress-lsp protect-mode command restores the default setting.

By default, no protection mode is configured for BGP ingress LSPs.

Format

ingress-lsp protect-mode bgp-frr

undo ingress-lsp protect-mode

Parameters

Parameter	Description	Value
bgp-frr	Configures the protection mode for BGP ingress LSPs to BGP Auto FRR.	-

Views

BGP view, BGP-IPv4 unicast address family view

Default Level

2: Configuration level

Usage Guidelines

To protect the links between the PE and its dual-homed ASBRs and the ASBRs themselves in the same AS, you can configure the protection mode of BGP Auto FRR.

Before configuring the protection mode of BGP Auto FRR, enable the BGP Auto FRR function.

It is recommended that the selection of labeled BGP IPv4 routes be based on the bestroute nexthop-resolved tunnel command.

Example

# Configure the protection mode of BGP Auto FRR for BGP ingress LSPs.

<HUAWEI> system-view
[HUAWEI] bgp 100
[HUAWEI-bgp] ipv4-family unicast
[HUAWEI-bgp-af-ipv4] ingress-lsp protect-mode bgp-frr