interference station threshold

Function

The interference station threshold command configures the alarm threshold for STA interference.

The undo interference station threshold command restores the default alarm threshold for STA interference.

By default, the alarm threshold for STA interference is 32.

Format

interference station threshold threshold-value

undo interference station threshold

Parameters

Parameter	Description	Value
threshold-value	Specifies the alarm threshold.	The value is an integer that ranges from 1 to 256.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

If there are many STAs that are managed by other APs around an AP, services of the STAs managed by the local AP may be affected.

After the interference detect-enable command is executed to enable interference detection, an AP can detect STAs that are managed by other APs. When the AP detects that the number of such STAs exceeds the alarm threshold configured using the interference station threshold command, the AP sends an alarm to the AC.

Example

# Set the alarm threshold for STA interference to 50.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name radio0
[HUAWEI-wlan-radio-2g-prof-radio0] interference station threshold 50