iot-card reset-factory-configuration

Function

The iot-card reset-factory-configuration command restores factory defaults of an IoT card.

Format

iot-card reset-factory-configuration ap ap-id ap-id card card-id

Parameters

Parameter	Description	Value
ap ap-idap-id	Specifies an AP ID.	The AP ID must exist.
card card-id	Specifies the ID of an IoT card.	The IoT card ID must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If an IoT card cannot communicate with the AP due to an error in IoT card parameter settings, you can run this command to restore factory defaults of the IoT card.

Example

# Restore factory defaults of an IoT card.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] iot-card reset-factory-configuration ap ap-id 1 card 1