iot-card reset-network-configuration

Function

The iot-card reset-network-configuration command resets network parameters of an IoT card.

Format

iot-card reset-network-configuration ap ap-id ap-id card card-id

Parameters

Parameter	Description	Value
ap ap-idap-id	Specifies an AP ID.	The AP ID must exist.
card card-id	Specifies the ID of an IoT card.	The IoT card ID must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

An IoT card involves network parameters for communicating with a host computer (such as the card IP address, server IP address, and DNS address) and air interface parameters in a wireless environment. In most cases, when the wireless environment becomes stable, air interface parameters remain unchanged. When the wired environment changes, you can only run the iot-card reset-network-configuration command to reset network parameters of the IoT card. During this process, the air interface parameters remain unchanged.

Example

# Reset network parameters of an IoT card.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] iot-card reset-network-configuration ap ap-id 1 card 1