iot-card switch-firmware

Function

The iot-card switch-firmware command switches the active and standby partitions of an IoT card.

iot-card switch-firmware ap ap-id ap-id card card-id

Parameter	Description	Value
ap ap-idap-id	Specifies an AP ID.	The AP ID must exist.
card card-id	Specifies the ID of an IoT card.	The IoT card ID must exist.

WLAN view

3: Management level

Usage Scenario

Upon a fault on the current partition of an IoT card, you can run this command to switch to the other partition.

# Switch the active and standby partitions of an IoT card.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] iot-card switch-firmware ap ap-id 1 card 1