ip-group service ip-address

Function

The ip-group service ip-address command configures an IP address of a controller.

The undo ip-group service ip-address command deletes the IP address of a controller.

By default, no controller IP address is configured on the device.

This command is supported only when the device interoperates with iMaster NCE-Campus.

Format

ip-group service ip-address ip-address [ port port-number ] pki-realm-name pki-realm-name

undo ip-group service ip-address

Parameters

Parameter	Description	Value
ip-address	Specifies the IP address of a controller.	The value is in dotted decimal notation.
port port-number	Specifies the port number of a controller.	The value is an integer in the range from 1 to 65535. The default value is 50304.
pki-realm-name pki-realm-name	Specifies the name of a PKI realm.	The value is a string of 1 to 64 case-insensitive characters without spaces.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Before the device sets up an IP-GROUP channel with a controller, you need to configure the IP address and port number of the controller on the device, so that the device can send packets to the controller.

Example

# Configure the IP address and port number of a controller.

<HUAWEI> system-view
[HUAWEI] ip-group service ip-address 10.1.1.1 port 50304 pki-realm-name abc