ip-group service timer up-delay
Function
The ip-group service timer up-delay command configures a delay in responding to the IP-GROUP channel Up event.
The undo ip-group service timer up-delay command restores the default configuration.
By default, the delay in responding to the IP-GROUP channel Up event is 30 seconds.
This command is supported only when the device interoperates with iMaster NCE-Campus.
Parameters
| Parameter | Description | Value |
|---|---|---|
interval |
Specifies a delay in responding to the IP-GROUP channel Up event. |
The value is an integer in the range from 0 to 600, in seconds. The value 0 indicates that the device responds to the IP-GROUP channel Up event without any delay. |
Usage Guidelines
Usage Scenario
When the IP-GROUP channel between the device and controller goes Up, the device responds with certain actions, for example, switching from emergency processing to normal processing. If the IP-GROUP channel goes Up frequently within a short time, the device resources are affected. To prevent this problem, set a delay in responding to the IP-GROUP channel Up event.
Precautions
If you want to modify the configuration after the IP-GROUP channel is established, run the undo ip-group service ip-address command to delete the IP-GROUP channel first.