iplpm link loss-measure interval

Function

The iplpm link loss-measure interval command configures the interval for packet loss measurement on the direct link.

The undo iplpm link loss-measure interval command restores the default interval for packet loss measurement on the direct link.

By default, the interval for packet loss measurement on the direct link is 10s.

Format

iplpm link loss-measure interval interval

undo iplpm link loss-measure interval

Parameters

Parameter	Description	Value
interval	Specifies the interval for packet loss measurement on the direct link.	The value is an integer that can be 1, 10, 60, or 600, in seconds.

Views

GE interface view, XGE interface view, MultiGE interface view, 25GE interface view, 40GE interface view, 100GE interface view

Default Level

2: Configuration level

Usage Guidelines

The interval for packet loss measurement on the direct link refers to the period from received packet statistics collection to sent packet statistics collection on a specified interface. To ensure accuracy of statistics data, run the undo iplpm link loss-measure enable command to disable packet loss measurement on the direct link in the interface view before changing the measurement interval.

Example

# On the GE0/0/1, set the interval for packet loss measurement on the direct link to 60s.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] iplpm link loss-measure interval 60