isolate enable (BD View)

Function

The isolate enable command enables isolation of users connected to an access-side BD.

The undo isolate enable command disables isolation of users connected to an access-side BD.

By default, isolation of users connected to an access-side BD is disabled.

Only the S6730-S, S6730S-S, S5732-H, S5731-S, S5731S-S, S5731S-H, S6730-H, S6730S-H, S5731-H, S5720-HI, S5730-HI, and S6720-HI switches support this command.

Format

isolate enable

undo isolate enable

Parameters

None

Views

BD view

Default Level

2: Configuration level

Usage Guidelines

In a VXLAN, users connected to the same BD can communicate. To isolate users connected to a BD, you can run the isolate enable command.

Example

# Enables isolation of users connected to BD 10.

<HUAWEI> system-view
[HUAWEI] bridge-domain 10
[HUAWEI-bd10] isolate enable