isolate remote enable (BD view)

Function

The isolate remote enable command configures unidirectional isolation from the access side to the tunnel side in a BD.

The undo isolate remote enable command disables unidirectional isolation from the access side to the tunnel side in a BD.

By default, unidirectional isolation from the access side to the tunnel side is disabled in a BD.

Only the S6730-S, S6730S-S, S5732-H, S5731-S, S5731S-S, S5731S-H, S6730-H, S6730S-H, S5731-H, S5720-HI, S5730-HI, and S6720-HI support this command.

Format

isolate remote enable

undo isolate remote enable

Parameters

None

Views

BD view

Default Level

2: Configuration level

Usage Guidelines

On a VXLAN network, users in the same BD can directly communicate with each other. To isolate unidirectional traffic from the access side to the tunnel side in a BD, run this command in the BD view.

Example

# Configure isolation from the access side to the tunnel side in BD 10.

<HUAWEI> system-view
[HUAWEI] bridge-domain 10
[HUAWEI-bd10] isolate remote enable