learn-client-address disable command disables STA address learning.
undo learn-client-address disable command disables STA address learning.
By default, STA address learning is enabled.
Usage Scenario
If a STA associates with an AP that has STA address learning enabled and obtains an IP address, the AP automatically reports the STA IP address to the AC to maintain the STA' IP address and MAC address binding entry
Prerequisites
You have disabled the DHCP trusted interface by running undo dhcp trust port in the VAP profile view.
Before disabling STA address learning, run the undo learn-client-address dhcp-strict command to disable strict STA IP address learning through DHCP.
Precautions
If a bridging device functions as a STA to connect to an AP enabled with STA address learning, the AP cannot learn IP addresses of users connected to the bridging device; therefore, the users cannot communicate with the network. In this situation, disable STA address learning.