The parity command configures the parity bit for serial data on an IoT card slot.
The undo parity command restores the configured parity bit to the default value.
By default, the parity bit is set to none on an IoT card slot.
parity { none | odd | even | mark | space }
undo parity
Parameter
Description
Value
Indicates no parity.
-
Indicates odd parity.
Indicates even parity.
Indicates mark parity.
Indicates space parity.
Serial profile view
2: Configuration level
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.