link-report-interval

Function

The link-report-interval command sets the interval at which an MP reports Mesh link information to the AC.

The undo link-report-interval command restores the default interval at which an MP reports Mesh link information to the AC.

By default, an MP reports Mesh link information to the AC at an interval of 30 seconds.

Format

link-report-interval report-interval

undo link-report-interval

Parameters

Parameter	Description	Value
report-interval	Specifies the interval at which an MP reports Mesh link information to the AC.	The value is an integer that ranges from 5 to 3600, in seconds. The default value is 30.

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the network is unstable, an MP may frequently send Mesh link establishment or teardown information to the AC, affecting AC's processing of user services. To solve this problem, run the link-report-interval command to configure an MP to periodically send Mesh link information to the AC. After the command is executed, the MP sends link information to the AC only at specified intervals, ensuring normal processing of user services.

Example

# Set the interval at which an MP reports Mesh link information to the AC to 20s.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] link-report-interval 20