link-rssi-threshold

Function

The link-rssi-threshold command sets the received signal strength indicator (RSSI) threshold of a mesh link.

The undo link-rssi-threshold command restores the default RSSI threshold of a mesh link.

By default, the RSSI threshold of a mesh link is -75 dBm. After the FWA mode is enabled in a Mesh profile, the RSSI threshold of a Mesh link is fixed as -90 dBm.

Format

link-rssi-threshold threshold-value

undo link-rssi-threshold

Parameters

Parameter	Description	Value
threshold-value	Specifies the RSSI threshold of a mesh link.	The value is an integer that ranges from -90 to -20, in dBm. The default value is -75. After the FWA mode is enabled in a Mesh profile, the RSSI threshold of a Mesh link is fixed as -90 dBm.

Parameter

Description

Value

threshold-value

Specifies the RSSI threshold of a mesh link.

The value is an integer that ranges from -90 to -20, in dBm. The default value is -75.

After the FWA mode is enabled in a Mesh profile, the RSSI threshold of a Mesh link is fixed as -90 dBm.

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The RSSI threshold of a mesh link indicates the minimum RSSI of the mesh link. If the RSSI of an MP that joins a WMN is lower than the RSSI threshold configured using the link-rssi-threshold command, the routing information table of the mesh link is updated and routing information about the MP is deleted.

The RSSI threshold of a mesh link depends on the distance between two MPs that establish the mesh link. If the two MPs are far from each other, a smaller RSSI threshold is recommended. If the two MPs are close to each other, a larger RSSI threshold is recommended.

Example

# Set the RSSI threshold of mesh links to -60 dBm.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] link-rssi-threshold -60