loss-measure enable continual

Function

The loss-measure enable continual command enables continual statistics collection for a measurement instance on a DCP.

The undo loss-measure enable continual command disables continual statistics collection for a measurement instance on a DCP.

By default, continual statistics collection is disabled for a measurement instance on a DCP.

Format

loss-measure enable continual

undo loss-measure enable continual

Parameters

None

Views

IPFPM-DCP instance view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If you are unaware of network performance degrading and want to continuously monitor packet loss on the network, run the loss-measure enable continual command to enable continual statistics collection.

Prerequisites

An IP FPM model has been established, including configuring a DCP and MCP, binding a TLP to a physical interface, and creating a target flow and IP FPM instance.

Precautions

Continual statistics collection and statistics collection based on the time range cannot be enabled simultaneously.

Example

# Enable continual statistics collection for a measurement instance on a DCP.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm dcp
[HUAWEI-nqa-ipfpm-dcp] instance 1
[HUAWEI-nqa-ipfpm-dcp-instance-1] loss-measure enable continual