lsp-version

Function

Using the lsp-version command, you can configure the protocol that is used by the LSP test instance.

Using the undo lsp-version command, you can restore the default setting.

By default, draft6 is adopted.

Format

lsp-version { rfc4379 | draft6 }

undo lsp-version

Parameters

Parameter	Description	Value
rfc4379	Indicates that the protocol defined in RFC 4379 is adopted.	-
draft6	Indicates that Draft-ietf-mpls-lsp-ping-06 is adopted.	-

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The lsp-version command can be used to specify the protocol that is used by the LSP test instance.

Prerequisites

If draft6 or rfc4379 is specified in the lsp-version command, specify lspping, lsptrace, lspjitter, pwe3ping, or pwe3trace in the test-type command.

The protocol adopted by a running LSP test instance cannot be changed.

Example

# Configure the LSP test instance to use the protocol defined in RFC 4379.

<HUAWEI> system-view
[HUAWEI] nqa test-instance user test
[HUAWEI-nqa-user-test] test-type lspping
[HUAWEI-nqa-user-test] lsp-version rfc4379