mac-authen offline dhcp-release (upgrade-compatible command)

Function

The mac-authen offline dhcp-release command enables the device to clear user entries when receiving DHCP Release packets from MAC address authentication users.

The undo mac-authen offline dhcp-release command restores the default configuration.

By default, the device does not clear user entries when receiving DHCP Release packets from MAC address authentication users.

Format

In the system view:

mac-authen offline dhcp-release interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

undo mac-authen offline dhcp-release interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10>

In the interface view:

mac-authen offline dhcp-release

undo mac-authen offline dhcp-release

Parameters

Parameter	Description	Value
interface interface-type interface-number1 [ to interface-number2 ] } &<1-10>	Specifies the type and number of an interface. interface-type specifies the interface type. interface-number1 specifies the number of the first interface. interface-number2 specifies the number of the last interface. The value of interface-number2 must be greater than the value of interface-number1. interface-number2 and interface-number1 together specify an interface range.	-

Views

System view, Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After the upgrade, this command is no longer supported, and it is replaced by the mac-authen offline dhcp-release command in the mac access profile view.