dot1x unicast-trigger (upgrade-compatible command)

Function

The dot1x unicast-trigger command enables 802.1X authentication triggered by unicast packets.

The undo dot1x unicast-trigger command disables 802.1X authentication triggered by unicast packets.

By default, 802.1X authentication triggered by unicast packets is disabled.

Format

dot1x unicast-trigger

undo dot1x unicast-trigger

Parameters

None

Views

Ethernet interface view, GE interface view, XGE interface view, 40GE interface view, Eth-Trunk interface view, Port group view

Default Level

2: Configuration level

Usage Guidelines

This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade.

After the upgrade, this command is no longer supported, and it is replaced by the dot1x unicast-trigger command in the 802.1X access profile view.