The out-group command creates a Target Logical Port (TLP) out-group for the target flow.
The undo out-group command deletes a TLP out-group or deletes a TLP from a TLP out-group.
By default, no TLP out-group is configured for the target flow.
| Parameter | Description | Value |
|---|---|---|
| dcp dcp-id | Indicates a DCP to which TLPs in a TLP out-group belongs. | This value is in dotted decimal notation. |
| tlp tlp-id | Indicates a TLP in a TLP out-group. | The value is an integer ranging from 1 to 16777215. |
Usage Scenario
To measure the packet loss or delay of service packets leaving a network, run the out-group command. In IP FPM hop-by-hop performance statistics scenarios, a hop is a set of links and interfaces that service packets travel through, from one measurement point or group to the next measurement point or group, and therefore is represented by (TLP in-group, TLP out-group). Performance statistics are implemented on the TLP in-point or in-group through which service packets enter a network and the TLP out-point or out-group through which service packets leave the network.
Prerequisites
The ach command has been run to create an ACH and display the ACH view.