nqa ipfpm mcp

Function

The nqa ipfpm mcp command enables global MCP and displays the IPFPM-MCP view, or directly displays the IPFPM-MCP view if global MCP has been enabled.

The undo nqa ipfpm mcp command disables global MCP.

By default, global MCP is disabled.

Format

nqa ipfpm mcp

undo nqa ipfpm mcp

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before performing packet loss measurement for service traffic, run the nqa ipfpm mcp command to enable global MCP and enter the IPFPM-MCP view.

Follow-up Procedure

Run the mcp id command to set the MCP ID.

Precautions

MCP and DCP functions can be configured on the same device.

Example

# Enable global MCP and enter the IPFPM-MCP view.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm mcp
[HUAWEI-nqa-ipfpm-mcp]