description (IPFPM-MCP instance view)

Function

The description command configures the description for a measurement instance on the MCP.

The undo description command deletes the description of a measurement instance on the MCP.

By default, no description is configured for a measurement instance on the MCP.

Format

description text

undo description

Parameters

Parameter	Description	Value
text	Specifies the description of a measurement instance.	The value is a string of 1 to 64 case-sensitive characters with spaces supported.

Views

IPFPM-MCP instance view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An IP FPM instance is identified by an integer ID, and therefore its functions are not easy to understand. The description command configures the description for a measurement instance on a DCP, which helps you understand the function of the measurement instance.

It is recommended that the description command be used to configure the description for a measurement instance in the following situations:

Many measurement instances are configured, and it is difficult to differentiate functions of each measurement instance.
The interval for using the same measurement instance is too long, and functions of measurement instances change.

Precautions

If an IP FPM instance is configured but does not have a description, it may be misused.

Example

# Configure the description for measurement instance 1 on the MCP.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm mcp
[HUAWEI-nqa-ipfpm-mcp] instance 1
[HUAWEI-nqa-ipfpm-mcp-instance-1] description NanJinToHeFei