measure disable (IPFPM-MCP instance view)

Function

The measure disable command disables measurement of all indicators in a measurement instance on the MCP.

Both the undo measure disable and measure enable commands enable measurement of all indicators in a measurement instance on the MCP.

By default, measurement of all indicators is enabled in a measurement instance on the MCP.

Format

measure disable

measure enable

undo measure disable

Parameters

None

Views

IPFPM-MCP instance view

Default Level

2: Configuration level

Usage Guidelines

If the MCP receives error data during the DCP configuration update, you can run the measure disable command to disable measurement of all indicators in a measurement instance on the MCP. When the DCP configuration update is complete, run the undo measure disable or measure enable command to enable measurement of all indicators in a measurement instance on the MCP so that data of the measurement instance is more accurate.

Example

# Disable measurement of all indicators in measurement instance 1 on the MCP.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm mcp
[HUAWEI-nqa-ipfpm-mcp] instance 1
[HUAWEI-nqa-ipfpm-mcp-instance-1] measure disable