nqa ipfpm dcp

Function

The nqa ipfpm dcp command enables global DCP and displays the IPFPM-DCP view, or directly displays the IPFPM-DCP view if global DCP has been enabled.

The undo nqa ipfpm dcp command disables global DCP.

By default, global DCP is disabled.

Format

nqa ipfpm dcp

undo nqa ipfpm dcp

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before performing packet loss measurement for service traffic, run the nqa ipfpm dcp command to enable global DCP and enter the IPFPM-DCP view.

Follow-up Procedure

Run the dcp id command to set the DCP ID.

Precautions

DCP and MCP functions can be configured on the same device.

Example

# Enable global DCP and enter the IPFPM-DCP view.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm dcp
[HUAWEI-nqa-ipfpm-dcp]