mep

Function

Using the mep command, you can configure the MEP ID for an NQA test instance.

Using the undo mep command, you can delete the MEP ID configured for an NQA test instance.

By default, the MEP ID for an NQA test instance is 0.

Format

mep mep-id mep-id

undo mep

Parameters

Parameter	Description	Value
mep-id	Specifies the MEP ID of an NQA test instance.	The value is an integer ranging from 1 to 8191.

Views

NQA view

Default Level

2: Configuration level

Usage Guidelines

Before starting an NQA test instance, you need to run the mep-id mep-id command to configure the EOAM module. Otherwise, the normal operation of the NQA test instance will be affected.

This command is available for NQA MAC ping test instances.

Example

# Set the MEP ID of an NQA MAC ping test instance to 1.

<HUAWEI> system-view
[HUAWEI] nqa test-instance test macping
[HUAWEI-nqa-test-macping] test-type macping
[HUAWEI-nqa-test-macping] mep mep-id 1