mesh-handover-profile

Function

The mesh-handover-profile command creates a Mesh handover profile or displays the Mesh handover profile view.

The undo mesh-handover-profile command deletes a Mesh handover profile.

By default, the system provides the Mesh handover profile default.

Format

mesh-handover-profile name profile-name

undo mesh-handover-profile { all | name profile-name }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a Mesh handover profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all Mesh handover profiles. NOTE: The Mesh handover profile default cannot be deleted.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

After a Mesh handover profile is bound to a Mesh profile, the Mesh profile can provide the vehicle-ground fast link handover function and apply to vehicle-ground communication scenarios.

Example

# Create the Mesh handover profile handover and bind it to the Mesh profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-handover-profile name handover
[HUAWEI-wlan-mesh-handover-handover] quit
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-handover-profile handover
Warning: This action may cause service interruption. Continue?[Y/N]y