mesh-handover-profile (Mesh profile view)

Function

The mesh-handover-profile command binds a Mesh handover profile to a Mesh profile.

The undo mesh-handover-profile command unbinds a Mesh handover profile from a Mesh profile.

By default, no Mesh handover profile is bound to a Mesh profile.

Format

mesh-handover-profile profile-name

undo mesh-handover-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of the Mesh handover profile bound to a Mesh profile.	The Mesh handover profile must exist.

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the mesh-handover-profile command to bind a Mesh handover profile to a Mesh profile so that the Mesh profile can provide the vehicle-ground fast link handover function and apply to vehicle-ground communication scenarios.

Example

# Create the Mesh handover profile handover and bind it to the Mesh profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-handover-profile name handover
[HUAWEI-wlan-mesh-handover-handover] quit
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-handover-profile handover
Warning: This action may cause service interruption. Continue?[Y/N]y