mesh-id

Function

The mesh-id command sets a Mesh ID for a Mesh profile.

The undo mesh-id command restores the Mesh ID of a Mesh profile to the default value.

By default, the Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH.

Format

mesh-id name

undo mesh-id

Parameters

Parameter	Description	Value
name	Specifies the Mesh ID of a Mesh profile.	The value is a string of 1 to 32 case-sensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

Views

Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

The Mesh ID of a Mesh profile is similar to the SSID. On a Mesh network, AP radios discover available Mesh services of other APs based on the Mesh ID.

Each Mesh profile must have a Mesh ID. The default Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH. You can run the mesh-id command to set a Mesh ID for a Mesh profile.

Example

# Create the Mesh profile test and set the Mesh ID of the profile to mesh-net.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-id mesh-net
Warning: This action may cause service interruption. Continue?[Y/N]y