mesh-profile

Function

The mesh-profile command creates a Mesh profile or displays the Mesh profile view.

The undo mesh-profile command deletes a Mesh profile.

By default, the system provides the Mesh profile default.

Format

mesh-profile name profile-name

undo mesh-profile { all | name profile-name }

Parameters

Parameter	Description	Value
name profile-name	Specifies the name of a Mesh profile.	The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").
all	Deletes all Mesh profiles. NOTE: The Mesh profile default cannot be deleted.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh profile is applied to an AP radio, Mesh VAPs are created on the radio.

Each Mesh profile must have a Mesh ID. The default Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH. You can run the mesh-id command to set a Mesh ID for a Mesh profile.

Example

# Create the Mesh profile test and set the Mesh ID of the profile to mesh-net.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-profile name test
[HUAWEI-wlan-mesh-prof-test] mesh-id mesh-net
Warning: This action may cause service interruption. Continue?[Y/N]y