mesh-profile (AP group radio view or AP radio view)

Function

The mesh-profile command binds a Mesh profile to an AP radio.

The undo mesh-profile command unbinds a Mesh profile from an AP radio.

By default, no Mesh profile is bound to an AP radio.

Format

mesh-profile profile-name

undo mesh-profile

Parameters

Parameter	Description	Value
profile-name	Specifies the name of the Mesh profile bound to an AP radio.	The Mesh profile must exist.

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh profile is bound to an AP group radio or an AP radio, a Mesh VAP will be generated on the specified AP radio to provide Mesh services for users.

Prerequisites

A Mesh profile has been created and properly configured.

Precautions

Among the VAPs created after a Mesh profile is bound to a radio, the VAP with the WLAN ID 16 cannot be occupied.

An AP radio can only have one Mesh profile bound.

On a triple-radio AP, radio 2 does not support the Mesh function.

This command has the same function as the mesh-profile radio command. You can use either of them.

Example

# Bind the Mesh profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] mesh-profile test