The mesh-profile radio command binds a Mesh profile to an AP group or AP.
The undo mesh-profile radio command unbinds a Mesh profile from an AP group or AP.
By default, no Mesh profile is bound to an AP group or AP.
mesh-profile profile-name radio { all | radio-id }
undo mesh-profile radio { all | radio-id }
Parameter |
Description |
Value |
|---|---|---|
profile-name |
Specifies the name of the Mesh profile bound to an AP group or AP. |
The Mesh profile must exist. |
all |
Binds a Mesh profile to all AP radios. |
- |
radio-id |
Binds a Mesh profile to a specified AP radio. |
The radio ID must exist. |
Usage Scenario
After a Mesh profile is bound to an AP group or AP, a Mesh VAP will be generated on AP radios to provide Mesh services for users.
Prerequisites
A Mesh profile has been created and properly configured.
Precautions
Among the VAPs created after a Mesh profile is bound to a radio, the VAP with the WLAN ID 16 cannot be occupied.
An AP radio can only have one Mesh profile bound.
On a triple-radio AP, radio 2 does not support the Mesh function.
Since the WLAN WDS and Mesh functions are mutually exclusive, the WDS and Mesh profiles cannot be applied to an AP radio at the same time.