The mngvlanid command sets a management VLAN for a cluster.
The undo mngvlanid command restores the default management VLAN of a cluster.
By default, the management VLAN is VLAN 1.
| Parameter | Description | Value |
|---|---|---|
| vlan-id | Specifies a VLAN ID. | The value is an integer ranging from 1 to 4094. |
On a Commander switch, if a management VLAN is changed or the management VLAN and its corresponding VLANIF interface are deleted, the cluster is automatically deleted.
If you change the ID of the management VLAN on a client switch, the client switch automatically withdraws from the cluster.
Use the management VLAN only on the cluster and do not use the VLAN for other services such as the Rapid Ring Protection Protocol (RRPP) and multicast services. Otherwise, service functions will be adversely affected.