ndp enable (interface view)

Function

The ndp enable command enables NDP on an interface.

The undo ndp enable command disables NDP on an interface.

The ndp disable command disables NDP on an interface.

By default, NDP is enabled on an interface.

Format

ndp enable

undo ndp enable

ndp disable

Parameters

None

Views

Ethernet interface view, GE interface view, XGE interface view, 25GE interface view, Eth-Trunk interface view, 100GE interface view, 40GE interface view, port group view, MultiGE interface view

Default Level

2: Configuration level

Usage Guidelines

Before you enable network topology collection, run the ndp enable command to enable NDP on an interface.

Example

# Disable NDP in the GE0/0/1 interface view.

<HUAWEI> system-view

[HUAWEI] interface gigabitethernet 0/0/1

[HUAWEI-GigabitEthernet0/0/1] undo ndp enable