monitor output keeptime
Function
The monitor output keeptime command sets the hold time of the signals indicating the maintenance compartment door on a device is open or closed when the monitoring function on the output line connecting to a monitoring interface is enabled.
The undo monitor output keeptime command restores the default setting.
By default, the hold time of the signals indicating the maintenance compartment door on a device is open or closed is 3 seconds.
Only the S5735-S-I supports this command.
Parameters
| Parameter | Description | Value |
|---|---|---|
time |
Specifies the hold time. |
The value is an integer ranging from 1 to 3600, in seconds. |
slot slot-id |
Specifies the slot ID. |
The value must be set according to the device configuration. |
Usage Guidelines
By default, the hold time of the signals indicating the maintenance compartment door on a device is open or closed is three seconds. That is, a camera keeps monitoring the device maintenance compartment door for 3 seconds and then turns to another direction. You can run the monitor output keeptime command to change the hold time based on the actual situation of the camera.