mpls rsvp-te send-message (upgrade-compatible command)

Function

The mpls rsvp-te send-message command configures the formats of objects in a sent message.

The undo mpls rsvp-te send-message command restores the default configuration.

By default, the formats of objects in the sent message are not configured.

Format

mpls rsvp-te send-message suggest-label exclude

undo mpls rsvp-te send-message suggest-label exclude

Parameters

Parameter	Description	Value
suggest-label exclude	Indicates that an RSVP message does not carry the suggest-label object.	-

Views

MPLS view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The mpls rsvp-te send-message command controls the formats of objects in the messages sent by nodes. If required, you can use this command to adjust the transmission of messages so that downstream nodes can use the carried object format in processing.

Precautions

The modification takes effect only for new LSPs.

Configurations of the four formats of objects in a sent message can take effect simultaneously.

Example

# Exclude the suggest-label object from a message.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls rsvp-te send-message suggest-label exclude